User`s guide

20031201
3-6
Setup
k Normal Mode Parameters
Tab Parameter Initial Default Range
[Sample] Sampling Interval 0.05 sec 0.0005 to 299 sec
Number of Samples 100 10 to 30000
Warm-Up Auto Auto, Manual (1 to 99)
[Trigger] Start Trigger Tap Screen Tap Screen, Count Down, CH1, SONIC
• For details about each parameter, see “Parameters Common to All Modes” on page 3-5.
•Except for the [Tap Screen] item, all of the other start trigger options require specification of
additional parameters. For details, see “Additional Start Trigger Parameters” on page 3-9.
k Real-Time Mode Parameters
Tab Parameter Initial Default Range
[Sample] Sampling Interval 1 sec 0.3 to 299 sec
Number of Samples 100 10 to 30000
Warm-Up Auto Auto, Manual (1 to 99)
[Trigger] Start Trigger Tap Screen Tap Screen, Count Down
• For details about each parameter, see “Parameters Common to All Modes” on page 3-5.
•Except for the [Tap Screen] item, all of the other start trigger options require specification of
additional parameters. For details, see “Additional Start Trigger Parameters” on page 3-9.
k Fast Mode Parameters
Tab Parameter Initial Default Range
[Sample] Sampling Interval 20 애sec 20 애sec to 500 애sec
Number of Samples 5000 10 to 30000
*
2
Warm-Up Auto Auto, Manual (1 to 99)
FFT Graph
*
1
On, Off
[Trigger] Start Trigger Tap Screen Tap Screen, Count Down, CH1,
Microphone
*
1
See “FFT Graph” on page 3-7 for details.
*
2
When FFT Graph is turned on, the setting range become 10 through 8192.
• For details about parameters other than FFT graph, see “Parameters Common to All
Modes” on page 3-5.
•Except for the [Tap Screen] item, all of the other start trigger options require specification of
additional parameters. For details, see “Additional Start Trigger Parameters” on page 3-9.