Specifications

— 6 —
3-2. Initial Setup
Perform the following initial setup procedure after repair.
1. Load the main battery (rechargeable battery pack).
Be sure to use the AC Adapter to charge the rechargeable battery pack before doing
anything else. Your CASSIOPEIA will not operate correctly if you load the backup battery
before charging the battery pack.
2. Use the AC Adapter to charge the battery pack for about five or six hours.
• Connect the AC Adapter to the CASSIOPEIA as shown in the illustration.
1 Slide the battery cover switch to
MAIN and remove the main battery
cover.
2 Install the rechargeable battery pack that
comes with the CASSIOPEIA. Make sure
that the battery pack is oriented correctly.
3 Replace the main battery cover.
4 Slide the battery cover switch to LOCK.
• Charging starts automatically as soon as you connect the AC Adapter to the CASSIOPEIA .
• The charge indicator is green while charging is in progress. It goes out when charging is complete.
• It takes about five or six hours to reach full charge.
• The time required to reach full charge may be longer the first time you charge the battery pack after
purchasing it.
Remove the AC Adapter from the CASSIOPEIA after charging is complete.