Specifications

— 57 —
Touch panel
connector
Insulation tape (yellow)
■ INNER CASE ASS'Y
1. Peel off Insulation tape (transparent).
2. Utilizing tweezers, disconnect Touch panel
(TP) connector.
3. Remove 3 screw C's and separate TP plate.
4. Remove 2 screw D's from MAIN PCB ass'y.
5. Disconnect FFC joiner from the connector.
6. Disconnecting the connectors, separate LCD
module and MAIN PCB ass'y.
7. Peeling the adhesive tape off, separate
Inverter from Inner case.
8. Push LCD module from the back (FPC side)
and peel off adhesive tape and Insulation
tape then separate the LCD module from
Inner case.
9. Disconnect the connector that puts together
LCD module and Inverter.
Insulation tape (transparent)
TP plate
screw C
FPC sub ass'y
screw D
FFC joiner
LCD module
Inverter