Specifications

— 28 —
■Once the diagnostic program is saved to Compact Flash memory card and E-100/-105, you can
perform this operation check without Compact Flash memory card because this program is saved to
D-RAM memory in E-100/-105.
Even if you delete this program saved to RAM memory by Full RESET and so on, you can perform
this operation check after inserting this Compact Flash memory card again.
■If you want to delete quite diagnostic program file (Diag.exe file) in Compact Flash memory card,
delete Diag.exe file at the time of the communication described above.
7-2-2.The way of using no Compact Flash memory
1.Make the copy of the Diag.exe file using another medium for memory (floppy disk, HD etc.).
2.Change its copied file name (Diag.exe) for CASIO_JX500diag.exe precisely.
3.Start to communicate between PC and E-100/-105 using the cradle.
4.Open the Windows folder in Guest of the Windows CE Services 2.2.
5.If any message appears, reply to its message.
6.Entering its CASIO_JX500diag.exe file in this Windows folder, the following screen will appear.
7.After this procedure, pull out E-100/-105 from the cradle.
8.It is recommended that you press RESET button on the back of E-100/-105 after item 6.
9.The operation check can be started after performing the procedure described to the next page.