Specifications

— 23 —
To interrupt a backup operation
1. Tap the [x] close button in the upper right corner of message box that is on the screen while a
backup operation is in progress.
This causes the message "Do you really want to cancel?" to appear.
2. Tap [Yes] to cancel the backup operation or [No] to resume it.
Restoring Data
Performing the restore operation causes the following to happen.
If the same file or registry data exists in both CASSIOPEIA memory and on the memory card, the
data in CASSIOPEIA memory is overwritten with the data on the memory card.
Any files or registry data in CASSIOPEIA memory that is not on the memory card is left as-is.
Calendar, Contacts, Tasks, and Inbox data in CASSIOPEIA memory is all overwritten with the
corresponding data from the memory card.
To return CASSIOPEIA to the exact status it was when you backed up the data, perform a full
reset before restoring the data. See the separate
Hardware Manual
for information about the full
reset.
Use the following procedure to restore data. Make sure you read the precautions under "Read this
first!" on page 21 before starting.
To restore data
1. Connect the AC adapter to your CASSIOPEIA.
2. Reset the CASSIOPEIA.
3. Insert the memory card that contains the data you want to restore into the CompactFlash card
slot of the CASSIOPEIA.
4. Tap [Start], [Programs], [Utility], and then [Card Backup].
This starts up Card Backup Tool and causes the dialog shown below to appear.