Specifications

R-98
Manager Operation
3-3. Manager function
Using the manager function makes it possible to control the terminal conditions. The
contents of the manager function are as follows:
1. System connection check
2. Remote on
3. Remote off
4. Busy reset
5. Stock maintenance
6. Drawer for clerk
7. CHK# (Clerk interrupt)
8. Order ID change
9. Error log print
10. System re-configuration
11. Item Data Capture
12. EURO Change over.
3-3-1. System connection check
This command shows the connection status of terminals, and printers.
1. Sign on a clerk (if necessary).
2. Press <X/Z MODE> repeatedly to assign manager mode.
3. Select “1. System Connection Check” and press the <YES>
key.
4. After checking the system connection, press the <ESC> key
to return the previous menu.
Note:
If there is unrecognized terminal there it shows “*” as below.
e.g.) #04 ************
MGR C 01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change v
0.00
System Connection Check
INLINE 156Kbps
#01 MC#01
RS-232C Printer 1 2 3
#02 MC#02
RS-232C Printer 1 * *
#03 MC#03
RS-232C Printer * * *
0.00
Physical ID, Logical ID
RS-232C printer recognition (1: printer (1), 2: printer (2), 3: printer (3)
Un recognized RS-232C printer