Specifications

R-94
Manager Operation
3. Manager operation
This section describes manager operations (such as machine initialization, IPL, manager
functions etc.) of QT-2100.
3-1. Machine initialization
There are three different types of initialization such as INIT, FC, and INIT2.
INIT; Machine initialization, all program and total data are reset.
FC; Flag clear, all program and total data are remained, only the current transaction data
are reset.
INIT2; Machine initialization 2, all program data are remained, only total data are reset.
The procedures of machine initialization are described in the chapter 1 of the QT-2100
programming manual. The required passwords are listed below.
3-1-2. Flag clear
Flag clear process is as follows:
3-1-1. INIT
Initialization process is as follows:
Start
End
Hardware reset
All RAM reset
Inline ID definition
File creation 1
File creation 2
Initialization result
to E-journal
Revise terminal
connection table
Input pass word
(see above)
Initialization operation
Input date/time, ID etc.
Receiving program
f rom other terminal or
CF card
Start
Hardware reset
Initialize work area/
buffers/flags
Initialization result
to E-journal
End
Menu selection
FC/Init2
Init 2
Operation Password Digit meaning
Init
2 0 0 0 0 for the U.S.
Normal
1 0 0 0 0 for other area
operation
Flag clear No need
Init2 8888888888
Define machine ID Init
nn00020000 nn = Machine ID (for the U.S.)
nn00010000 nn = Machine ID (for other area)
* See the “INIT code” section to notice the detail information of the last three digits.