Specifications

R-75
QT-2100 Reference Manual
Calculating the total wages of the employees per hour
Flow of Time & Attendance operation
The following flow shows the order of time & Attendance function by pressing the
specified keys: It is possible to specify one key as both <CLOCK-IN> and <CLOCK-
OUT> function, or specify two keys separately. ( Refer to “4-3-7-33 Worksheet for clock-
in/clock-out” in Programming manual for details.)
CLOCK-IN →
(
BREAK-IN → BREAK-OUT
)
→ CLOCK-OUT
2-10-2. CLOCK-IN Operation
This function is used to register the Starting work time.
2-10-2-1. CLOCK-IN operation (1)
Program: Not using the window and impossible to specify job code.
Allow to specify job code = NO, Display job code window = NO
(Refer to Programming manual, page 74.)
Operation
1. XXXXXX <CLOCK-IN>
When this message appears, press the <YES> key to register
the start of working hours.
When you press the <NO> key, previous menu will appear.
XXXXXX
Time zone
Zone 1 Cycle 1
Zone 1 Cycle 2
Zone 1 Cycle 3
Zone 2 Cycle 1
Zone 2 Cycle 2
Hourly/Labor
Totalizer 1
Totalizer 2
Totalizer 3
Totalizer 4
Totalizer 5
REG 10-10-01 11:59 AM 001234
GLENN DEAL 11:59 AM
Clock-in OK?
0.00
Employee No.