Specifications

R-63

QT-2100 Reference Manual

2-6-2. Clerk detail memory

The register can total any daily total memory (such as fixed totalizer, department PLU, etc.)

clerk by clerk.

After initialization, clerks have 10 detail memories which are assigned to gross, net, and

4 media in drawers. If you want to set more detail memories to clerks, allocate clerk detail

memory and detail link memory at the same time.

Clerk detail memory: File 011/111/211/311/411/511/611

Clerk detail link: File 030

2-6-3. Clerk training

Clerk training can be performed when employing new clerks or retraining clerks.

Training is normally performed during working hours, and the QT-2100 has the following

training functions.

1) It is not necessary to remove one terminal from the system for training purpose during

working hours.

2) Programming options, etc., are controlled exactly the same way as a working clerk.

3) Receipts are different from those normally used. The training receipts are filled with

training filler (“*” default.)

4) Only the REG/RF/REG– mode can be used for training.

2-6-4. Manager mode control

There is no REG 2 mode on the QT-2100, but you can control some functions (you want)

under manager control.

Preparation for this function:

1) Set “NO” to any functions you want to disable for CLERKS in the Allowed function 1

~ 5 list in the clerk programming. (See page 85 ~ 88 of the programming manual.)

2) Set the type of operator to “Manager” for the manager. (See page 81 of the programming

manual.)

Operation for this function:

1. When the transaction is prohibited, the register displays error

message and the clerk calls the manager.

2. The manager enters “2” and press the <REG mode> key.

REG

01 10-10-01 12:34 000001

1 PLU0001 •10.00

1 PLU0002 •20.00

1 PLU0003 •30.00

Operator Error

3 ST •60.00