Specifications

R-60
Application System
2-5. Other check tracking system control
2-5-1. The timing to clear check detail and index file after finalization
There are two timings to clear detail and index files.
1. The check is cleared after printing finalized data on slip or guest check receipt, or the
check is also cleared when the new or old check operation is made on the terminal
finalized the transaction.
2. The check is cleared after printing finalized data on slip or guest check receipt, or check
is also cleared when the same finalized check number is assigned in new check
operation.
This option is set on the page 54 of the Programming manual.
2-5-2. Table transfer
This function is used for transferring the contents of a check to another check.
The detail data can be excluded from the transferring check by programming (ST transfer).
There are two cases depends on the status of the transferring check.
1. If the transfer check is not used.
The entered check number is overwritten.
2. The check number is already used.
Add the contents to the existing contents.
This option is set on the page 121 of the Programming manual.
2-5-3. Store and Recall
These functions are used for the driving through purchase.
The check number used in store operation is defined by check No. range programming.
2-5-3-1 Store
This function is used for storing the check No. of the registered items. The Detail/Index at
the drive-through entrance record the registered items and store it’s check No., and then
print out the temporary receipt. A customer receive this temporary receipt, and drive up to
the exit with this to receive the ordered item. The stored data transfer to the check tracking
taster/backup Master.
2-5-3-1 Recall
This function is used for recalling the transferred check No. to total the sum. The totalizer
at the drive-through exit recall transferring check No. in order of the oldest record. A
customer can recieve the ordered items, and pay for them.