Specifications

R-50
Application System
65) New/Old check key (Function code 093)
This key is used in a check tracking system to input check numbers in order to open new
checks and to reopen existing checks. When the clerk inputs a check number, the register
checks to see if that number already exists in the check tracking memory. If there is no
matching number in the memory, a new check is opened under the input number. If the
check number input matches a number already stored in the memory, that check is
reopened for further registration or finalization.
In addition to the common programming, this key has the following option:
– Enable auto check assignment
66) Add check key (Function code 094)
This key is used in a check tracking system to combine the details of more than one check
into a single check.
67) Separate check key (Function code 095)
This key is used in a check tracking system to separate selected items or to separate by seat
number from one check to another check.
68) OBR (Optical Barcode Reader) key (Function code 103)
This key is used to enter scanning PLU code manually.
69) Clock-in/out key (Function code 108)
This key is used to register the time when employees start/finish their job.
In addition to the common programming, this key has the following options:
– The purpose of users
– Print when the key is pressed
70) Break-in/out key (Function code 109)
This key is used to register the starting/finishing time when employees have a recess.
In addition to the common programming, this key has the following options:
– The purpose of users
71) Substitution key (Function code 111)
Replaces group PLU with a PLU not preset in the pulldown menu.
72) Ketten Bon key (Function code 113)
This key is used to enter quantities for multiplication. Multiplication by this key issues
singular order prints.
In addition to the common programming, this key has the following options:
– Result rounding
– Entering order (quantity × @ or @ × quantity)
73) House Bon key (Function code 114)
This key is used to register items for in-store use.
74) Post Entry key (Function code 115)
This key is used to indicate the reserved item of set menu and register it as a fixed item later
on.
– Enter post entry
Press this key while the window is opened, the key descriptor appears on the screen and
it is registered as a reserved item.
– Fix post entry
After finishing the set menu registration, move the cursor on to the reserved item, press
this key again, then the appropriate window will be opened to fix it.
75) Round Repeat key (Function code 116)
This key is used to register the same items which were ordered just before.
In addition to the common programming, this key has the following options:
– Perform new balance after round repeat
– Include plus/minus, premium/discount result to round repeat amount