Specifications

R-45
QT-2100 Reference Manual
19) Premium key (Function code 030)
This key applies a preset % or manual input % to obtain the premium amount for the last
registered item or subtotal. In addition to the common programming, this key has the
following options:
– Premium rate
– Multiple validation
– Taxable status
– Allow manual rate override
– Allow key operation after subtotal
– Allow key operation after item registration
– Result rounding (Round off/Cut off/Round up)
– Commission status
20) Refund key (Function code 033)
This key declares next input for a return money.
21) Error correct/Void key (Function code 034)
This key is used to correct the last registered item, discount, premium, amount tendered,
etc. This key also invalidates proceeding data registered for departments, PLUs or set
menus only.
In addition to the common programming, this key has the following option:
– Select void reason
– Item delete
22) Coupon 2 key (Function code 036)
This key is used to register coupons. The registered coupon amounts is deducted from the
department, PLU or gross totalizers and the net totalizers.
23) Validation key (Function code 037)
This key validates item or transaction amounts on slips. Validation can be made compul-
sory for certain function keys. Multiple validation can be prohibited for certain function
keys.
24) Receipt key (Function code 038)
This key issues a receipt for the last transaction (post-finalization receipt) when the original
receipt is not issued. This key also issues a guest receipt. The guest receipt can be
designated by seat number.
In addition to the common programming, this key has the following options:
– Maximum number of post receipts
– Post/Guest receipt format (Print out/Display)
– Print current time on guest receipt
– Reset the finalized check
– Issue post receipt after clerk interrupt/check tracking
– Order printer number of issuing guest receipts
– Line numbers of the guest bottom message
25) Check endorsement key (Function code 039)
This key is used to print a preset check endorsementusing the slip printer.
In addition to the common programming, this key has the following option:
– Line number of auto back feed before printing
26) Non add key (Function code 040)
This key prints reference numbers (personal check number, card number etc.) In addition
to the common programming, this key has the following options:
– Allow mode change after non add registration as first transaction
– Order character record number
– Printing color on order printer (black, normal/red, reverse)
– Selection of order printer number (1 ~ 7)