Specifications

R-38
Application System
Transaction validation is valid for the following function keys:
– Received on account, Paid out, Pick up, Loan, Check cashing, Minus, Plus, Discount,
Premium, Void keys
You can program the allowable number of validation printings or multiple validation
printing status for the above listed keys.
Also some of these keys can be programmed as validation compulsory, this means that
registration is not permitted until the validation of the former registration has been
performed.
Item validation is performed directly following an item registration listed below.
– Departments
– Subdepartments
– PLUs
You can program the multiple validation printing status for above items.
2-1-7-3. Slip print control
Connection of an optional receipt/journal printer (SA-3015) or an optional slip printer (SP-
1300) to the QT-2100 makes it possible to print transaction details on a slip.
To print a slip, insert a slip paper into the printer, and adjust paper position by pressing the
<Slip feed/release> key (function code 056) or the <Slip back feed/release> key (function
code 054) and then press the <Slip batch print> key (function code 055). Or it is possible
to find the appropriate slip printing start line automatically.
After printing a slip, the paper is automatically released.
If the paper is not released for some reasons, press <Slip feed/release> or <Slip back feed/
release> to release the paper.
Before using slip printer, you should program the maximum lines of slip.
The following sections are the features to control slip printing format:
2-1-7-4. Endorsement message print control
The QT-2100 allows printing of endorsement messages on the slip printer (SA-3015 or SP-
1300) for check registrations. To perform endorsement message printing, insert the paper
into the slip printer following finalization using the <Check> key or check cashing
transaction using the <Check> key, and press the following key:
– Endorsement key (function code 039)
Check key and check cashing key can be programmed for compulsory endorsement print.
The endorsement message contents should be programmed into the endorsement message
file (file 033).