Specifications

R-136
Registration
4-5. Using the LIST function
Before using the LIST function, the following programs are necessary to use this function.
1) Allocating the <LIST> key or the <LIST-#> key (page 24 of the Programming manual)
In case of using the <LIST> key, <LIST> key(s) should be allocated on the keyboard
before step 2.
2) Programming pulldown group (page 34 of the Programming manual)
3) Programming item price (page 159 of the Programming manual)
Normal registration by using the <LIST> and <LIST-#> key
1. Press the <LIST> key or enter the list No. and press the
<LIST-#> key.
2. Select the appropriate item and press the <YES> key.
Direct selection by using the <LIST> key
1. Press the appropriate record number and press the <LIST>
key brings direct selection of the item.
REG C 01 10-10-01 12:34 000001
LIST01
1.PLU0001
2.PLU0002
3.PLU0003
4.PLU0004
0.01
REG C 01 10-10-01 12:34 000001
1 PLU0001 •10.00
PLU0001 •10.00
1 •10.00
REG C 01 10-10-01 12:34 000001
1 PLU0001 •10.00
PLU0001 •10.00
1 •10.00
<List> or No. <List-#>
↓
PLU 1
PLU 2
PLU 3
← Select one of these.
←
←