Specifications

R-128
Manager Operation
3-8. Collecting Electronic journal data
It is possible to do collection of electronic journal through inline system.
Refer to the terminal structure as below.
Flow of the file collection
PC sends Z-lock command by using job command to collection master.
1. PC enables to check the Z-lock confirmation.
2. PC sends the collection command by using job command to collect E-journal files from
one satellite terminal.
3. Collection master receives the E-journal data from one satellite.
PC enables to check whether the collection master has finished the job.
4. PC sends the Z-command or X-command to the collection master.
5. PC receives the collection data from consolidation file. If the Z-command has issued
at step 4, consolidation file in the collection master are all reset.
6. Back to step 2 until all designated terminals are collected.
Data transferring flow
E-journal data in each terminal is copied to the consolidation file individually.
Notes:
• Just after the receiving is over, the data is remained in the consolidation file. To clear
this data, send the Z-command or the file clear command to the collection master from
the PC.
• In case of collection Z, the electronic journal file in the satellite terminals are cleared.
Satellite
Collection Master
PC
online
Inline
Satellite
Satellite (1) file
Satellite (2) file
•
•
•
•
•
•
Copy
Copy
Copy
Consolidation file
(in Collection
Master)
PC
Satellite (1)
Satellite (2)