Specifications

R-105
QT-2100 Reference Manual
3-3-10. System re-configuration
This command is one procedure of down recovery. It backs the contents of the system
configuration file to the original value.
It should be executed under these conditions:
1) After issuing “Open check report.”
2) All ECRs are connected and work normally (Check by system connection check)
3) No ECRs are during registration, collection, consolidation, sending/receiving pro-
grams.
4) Activate “System re-configuration” command at the terminal on which the “System re-
configuration” icon is lit.
1. Sign on a clerk (if necessary).
2. Press <X/Z MODE> repeatedly to assign manager mode.
3. Select “10. System Re-configuration” and press the <YES>
key.
4. Choose the option “YES (Perform system re-configuration)/
NO (Abort this procedure)” and press the <YES> key.
MGR C 01 10-10-01 12:34 000000
Manager Mode
3.Remote off ^
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
9.Error Log Print
10.System Re-configuration v
0.00
Re-configuration require icon
System Re-configuration
System Re-configuration NO
OK? YES
0.00