Specifications

R-102
Manager Operation
3-3-6. Drawer for clerk
This command is used to designate the drawer 1 or 2.
1. Sign on a clerk (if necessary).
2. Press <X/Z MODE> repeatedly to assign manager mode.
3. Select “6. Drawer for Clerk” and press the <YES> key.
4. Enter the appropriate drawer number (1 or 2, 0 means drawer
1), and press the <YES> key.
5. Press the <ESC> key to return to the previous menu.
3-3-7. CHK# (Clerk interrupt)
This command is used to designate the check number for clerk interrupt to each clerk.
1. Sign on a clerk (if necessary).
2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “7. CHK# (CLK Interrupt)” and press the <YES> key.
4. Enter the appropriate check number, and press the <YES>
key.
5. Press the <ESC> key to return the previous menu.
MGR C 01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change v
0.00
Drawer for Clerk
C 01 0
C 02 0
C 03 0
C 04 0
C 05 0
C 06 0
0.00
MGR C 01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change v
0.00
Drawer for Clerk
C 01 000001
C 02 000002
C 03 000003
C 04 000004
C 05 000005
C 06 000006
0.00