User manual

Notes:

1. OBROpen func

tion also can be used to specify each "Enable" or "Disable" status for

scanning individual symbology. The settings with OBROpen funct

ion have the

priority over the settings with OBRSetScanningCode func

tion. This means that the

settings on individual symbology performed with OBRSetScanningCode funct

ion

are reset to the settings with OBROpen func

tion when OBROpen function is called.

2. IT-600, DT-X7, DT-X11, DT-X30, IT-800, IT-300, and DT-X8 support the symbology.

3. IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E do not support that the

settings for reading Industrial 2of5 and IATA symbologies are to be concurrently made

enabled. If it is done wrongly, all other settings for reading other symbologies are

disabled and a parameter error is returned.

4. Individual settings for reading RSS-14, RSS-14 Stacked, and RSS Expanded, and RSS

Expanded Stacked symbologies are not supported. If setting for reading a standard RSS

symbology is set enabled, all the corresponded RSS Stacked symbologies are

automatically set enabled for reading.

5. The RSS symbologies change its name to "GS1 DataBar".

RSS-14 → GS1 DataBar Omnidirectional

RSS Limited → GS1 DataBar Limited

RSS Expanded → GS1 DataBar Expanded

RSS-14 Stacked → GS1 DataBar Stacked

RSS Expanded Stacked → GS1 DataBar Expanded Stacked

6. The setting for reading Code128 symbology will make also reading the GS1-128

symbology (previously named as EAN128 symbology) possible.