User manual

181
Table 5.22 LED control option parameters
0Disable
1Enable
LEDCTRL Set LED setting.
2Enable
Disable when scan fails
Table 5.23 OutBuff control option parameters
0 Output to OBR buffer.
2 Output to Key.
3 Output to Clipboard.
OUTBUFF Specify output mode.
4 Output to Keyboard event.
Table 5.24 Suff Char option parameters
0 CR
1LF
2CR+LF
3TAB
ENDCODE Specify termination code.
4 No termination code
Table 5.25 Multi-step read option parameters
0Normal read
MULTISTEP Specify multi-step read mode.
1 Multi-step read
Table 5.26 Comp Counter option parameters
CMPCNT Specify no. of verifications. In the range of 1 to 9(Laser)
In the range of 0 to 9(Linear
Imager)
Table 5.27 Read counter option parameters
READCNT Specify no. of times to scan in
continuous read mode.
In the range of 1 to 9
Table 5.28 Scan time option parameters
SCANTIME Specify a time period (in
second) of timeout.
In the range of 1 to 9
0 Disable noise filter.
1 Enable software filter.
2 Enable hardware filter
FILTERMODE Specify noise filter mode.
3 Enable software/hardware
filters.
FILTERCNT Specify a time span between
when decoding starts and until
when noise filter begins to
activate.
In the range of 1 to 8