User manual

174
0Disable
CODE39_CHKCH Specify check character output
1Enable
Table 5.3 NW-7 option parameters
NW7_MIN Specify minimum no. of digits. 1 to 62 (DT-X11)
1 to 63 (IT-600, DT-X7, DT-X30,
IT-800, IT-300, DT-X8) (Note 7)
NW7_MAX Specify maximum no. of digits. 1 to 62 (DT-X11)
1 to 63 (IT-600, DT-X7, DT-X30,
IT-800, IT-300, DT-X8) (Note 7)
0 With start and stop codes NW7_OUTFORMAT Specify output format.
1 Without start and stop codes
0Disable NW7_CHKD Specify check digit calculation.
1 Enable(DT-X7, DT-X30,
IT-800, IT-300, DT-X8)
0Disable NW7_CHKCH Specify check character output.
1Enable
Table 5.4 WPC Addon option parameters
WPCADDON_MIN Specify minimum no. of
digits.
10 (Fixed)
WPCADDON_MAX Specify maximum no. of
digits.
18 (Fixed)
0 Output WPC Addon symbology
with "0" at the forefront.
WPCADDON_OUTFORMA
T
Specify output format.
1 Output WPC-Addon symbology
without "0" at the forefront.
0Disable WPCADDON_CHKD
(Note 5)
Specify check digit
calculation.
1Enable
WPCADDON_CHKCH Specify check character
output.
0 Disable (Fixed)
Table 5.5 WPC option parameters
WPC_MIN Specify minimum no. of digits. 8 (Fixed)
WPC_MAX Specify maximum no. of digits. 13 (Fixed)
0 Output WPC with "0" at the
forefront.
1 Output WPC without "0" at
the forefront.
WPC_OUTFORMAT Specify output format.
14 Output WPC in GTIN
format.
0Disable WPC_CHKD
(Note 5)
Specify check digit calculation.
1Enable
WPC_CHKCH Specify check character output. 0 Disable (Fixed)