User manual

13
Member Description Functions that use identical setting
Type Sets up read mode. OBRSetScanningType
Gain Sets up gain. OBRSetGainControl
Buzc Sets up the buzzer. OBRSetBuzzer
Ledc Sets up the LED. OBRSetLED
Bufc Sets up output mode. OBRSetBuffType
Endc Sets up termination code. OBRSetSuffixChar
Mode Sets up step read. OBRSetMultiStepReading
Dumy Reserved -
cmp_ct Sets up the no. of validations. OBRSetCheckCounter
rd_ct Sets up the no. of readings. OBRSetScanningCounter
scn_tm Sets up timeout. OBRSetScanningTimeout
dwFilterMode Sets up noise filter mode. OBRSetFilter
dwFilterCnt Sets up a time period between when
starting scanning and when starting
noise filter operation.
OBRSetFilterOnTimer
dwLearning Sets up the decoder learning mode. OBRSetDecodeLearningMode
dwVibc Sets up the vibrator. OBRSetVibrator
dwScanningKey Sets up scanning trigger key. OBRSetScanningKey
dwSwing Sets up laser beam swing angle mode. OBRSetSwingAngle
dwFocus Sets up laser focus. OBRSetFocus
dwNotification Sets up notification of scanning
complete event.
OBRSetScanningNotification
dwDecodeLevel Sets up decoding level. OBRSetDecodeLevel
Notes:
1. The parameters are as follows.
[0] Reserved
[1] Minimum no. of digits.
[2] Maximum no. of digits.
[3] Specify output format.
[4] Specify check digit calculation.
[5] Specify check character output.
2. The RSS symbologies change its name to "GS1 DataBar".
RSS-14 → GS1 DataBar Omnidirectional
RSS Limited → GS1 DataBar Limited
RSS Expanded → GS1 DataBar Expanded
RSS-14 Stacked → GS1 DataBar Stacked
RSS Expanded Stacked → GS1 DataBar Expanded Stacked
3. To set the Check Digit Calculation to "Disable" for WPC Addon symbology or WPC symbology,
be sure to set the Check Digit Calculation to "Disable" for both WPC Addon and WPC
symbologies.
4. To set the Check Digit Calculation to "Disable" for UPC-E Addon symbology or UPC-E
symbology, be sure to set the Check Digit Calculation to "Disable" for both UPC-E Addon and
UPC-E symbologies.