User manual

119
byMaxLength
This parameter is for specifying the maximum number of digits. Any bar code of Code93
symbology with its length longer than the value set in this parameter will not be decoded.
Each default of the respective models is as follows.
• DT-X11
77 digits
• IT-600
70 digits
• DT-X7
70 digits
• IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E
50 digits
byCheckDigit
This parameter is for specifying check digit selecting either of the values listed below.
OBR_CHKDOFF : Without check digit calculation
OBR_CHKDON : With check digit calculation
Return Values
OBR_OK : Normal end
OBR_PRM : Parameter error
OBR_PON : Open already
OBR_NOT_DEVICE : Scanner driver error. In the Device Emulator, this value is not returned.
FUNCTION_UNSUPPORT : Unsupported error