User manual

115
byMaxLength
This parameter is for specifying the maximum number of digits. Any bar code of
Interleaved 2of5 symbology with its length longer than the value set in this parameter will
not be decoded. Each default of the respective models is as follows.
• DT-X11
92 digits
• IT-600
94 digits
• DT-X7
94 digits
• IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E
50 digits
byCheckDigit
This parameter is for specifying check digit selecting either of the values listed below.
OBR_CHKDOFF : Without check digit calculation
OBR_CHKDON : With check digit calculation
byCheckChar
This parameter is for specifying check character selecting either of the values listed below.
OBR_CHKKOFF : Without check character output
OBR_CHKKON : With check character output
Return Value
OBR_OK : Normal end
OBR_PRM : Parameter error
OBR_PON : Open already
OBR_NOT_DEVICE : Scanner driver error. In the Device Emulator, this value is not returned.
FUNCTION_UNSUPPORT : Unsupported error