User`s guide

When
using
eMbedded
Visual
C++
4.0
1. Establish a connection between the Device Emulator and PC via ActiveSync before starting
debugging in eMbedded Visual C++ 4.0. For establishing connection via ActiveSync, refer to
Chapter 9.4.3 “Connecting via ActiveSync”.
2. Navigate to Build in the menu bar → Start Debug → Go to start up debugging.
Figure
9.7
3.
Similar
to
ordinary
debugging
operations
with
an
actual
DT-X7,
the
Device
Emulator
allows
break point setting (circled in red in Figure 9.8) in the source code and step-by-step debugging.
Figure
9.8
65