User`s guide

Parameter Description
SSID
Enter
the
SSID
of
the
network
you
want
to
connect
to.
Securit
y
Disab
None.
WEP Open in Authentication field.
WPA PSK in Authentication field (if selected, the Key field must be set
also.)
EAP-PEAP in Authentication field
EAP-TLS
in
Authentication
field
Key Enter 26 (maximum) alphanumeric digits (13 hex pairs) in the Key field if
128 bit
radio button is selected. Or, enter 10 (maximum) alphanumeric digits (5 hex pairs)
in
the Key field if 64 bit radio button is selected.
The field displays the number of characters that have been entered.
***** in the field implies that the key has been extracted from the ini file. If *****
in
Parameters in
EAP-Properties
Description Default
User name Input a user name in alphanumeric
(maximum
100
None
Password Input a password in alphanumeric (maximum
100
alphanumeric).
***** in the field implies that the password has
been
extracted
from
the
ini
file.
If
*****
in
the
None
Domain Input a domain in alphanumeric (maximum
100
None
Validate server
certificate
Set up the requisition for server certificate.
With check mark : certificate is required.
Without check mark: certificate is not
required.
Certificate is not
necessary
2.
Click
Basic
tab.
Set
each
parameter
in
the
tab
by
referring
to
the
descriptions
for
the
parameters
in Tables 6.3 and 6.4
Figure
6.2
Table
6.3
If
EAP-PEAP
radio
button
in
Authentication
field
is
selected,
click
the
EAP-Properties
button
that appears when selecting the EAP-PEAP radio button to set also the following parameters.
Table 6.4
42