User`s guide

Parameter Nothing is set (DHCP) ”Configure IP” is set
Enable DHCP or
Configure IP
”Enable DHCP” is assumed. ”Configure IP” is set.
IP
Does
not
determine
IP
address.
Entered
address
is
set
as
is.
MASK
Does
not
determine
subnet
mask.
Entered
address
is
set
as
is.
GateWay
Does
not
determine
gateway.
Entered
address
is
set
as
is.
DNS1 Does not determine primary DNS
address.
Entered address is set as is.
DNS2 Does not determine secondary DNS
address.
Entered address is set as is.
WINS1 Does not determine primary WINS
address.
Entered address is set as is.
WINS2 Does not determine secondary WINS
address.
Entered address is set as is.
Parameter Description
Enable
DHCP
or
Configure
Determines
“
Enable
”
or
“
Disable
”
for
DHCP.
IP
Determines
IP
address.
MASK
Determines
subnet
mask.
GateWay
Determines
default
gateway.
DNS1
Determines
primary
DNS
address.
DNS2
Determines
secondary
DNS
address.
WINS1
Determines
primary
WINS
address.
WINS2 Determines secondary WINS address.
6.
Configuring
WLAN
on
the
DT-X7
To
establish
communication
between
the
DT-X7
(DT-X7M10R)
and
PC
via
WLAN
configuration,
follow the steps, 1 to 6, below to set up a WLAN configuration on the DT-X7. After setting up the
configuration, be sure to perform a site survey prior to starting communication via WLAN.
1. Navigate to Start → Settings → WLANConfig and then click IP tab.
Figure
6.1
Table
6.1
If
any
of
the
settings
in
Figure
6.1
is
omitted,
the
process
described
in
the
following
table
will
automatically take place in the field.
Table
6.2
41