User`s guide

5.7
Direct
TCP/IP
Connection
from
Visual
Studio
If
you
have
a
network
connection
to
the
DT-X7
(for
example,
via
WLAN
or
the
Ethernet
cradle)
then you can establish a direct link to the development PC without using ActiveSync.
For
Visual
Studio
.NET
2003
You require the WindowsCE Utilities add-on pack (described in Chapter 3). Refer to the readme file
supplied with the add-on pack for details on how to set up the connection.
For
Visual
Studio
2005
1. Download the files listed below to the DT-X7.
- Clientshutdown.exe
- ConmanClient2.exe
- CMAccept.exe
- DeviceDMA.dll
- eDbgTL.dll
- TcpConnectionA.dll
The
source
folder
in
the
PC:
C:\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\armv4i
The destination folder in the DT-X7:
\Windows
2. Run ConmanClient2.exe on the DT-X7.
3. Set the device IP address in Visual Studio 2005.
Navigate to Tools in the main menu of Visual Studio 2005 → Options… → Device Tools →
Devices.
Choose DT-X7 Device in the pull-down menu of Devices: and click Properties….
Click Transport: to access Configure… and set up Device IP address as shown in Figure
5.26.
Figure
5.26
4.
Run
CMAccept.exe
on
the
DT-X7.
5. Navigate to Tools in the main menu of Visual Studio 2005 → Connect to Device….
39