User`s guide

4.
Before
using
the
cradle
ports,
remove
the
caps
from
the
ports.
When
using
a
LAN,
connect
one
end of the LAN cable to the LAN port and the other end to the PC or hub. When using a USB
connection, connect one end of the USB cable (DT-380USB) to the USB port and the other end
to the PC.
Figure
4.9
5.
Align
the
contacts
on
the
underside
of
the
DT-X7
with
the
power
supply
contacts
on
the
Ethernet
Cradle and then set the DT-X7 into the cradle so that mount holes in the back of the DT-X7 are
aligned with the mount hooks on the cradle. Once the DT-X7 is properly set in the cradle, the
power LED on the front of the Ethernet cradle lights green.
Figure
4.10
Status
of
Indicator
1
on
DT-X7
Orange
Red
Green
Important
notes:





