User`s guide

4.2
HA-F62IO
Use
the
dedicated
AC
adaptor
(AD-S42120BE)
for
supplying
power
to
the
HA-F62IO
Ethernet
Cradle. Ensure that you connect the AC adaptor to the cradle before starting communication
between the DT-X7 and PC via the cradle. Follow the steps below to connect the power supply to
the DT-X7 using the dedicated AC adaptor.
1.
Plug
the
AC
adaptor
into
the
AC
adaptor
jack
on
the
back
of
the
Ethernet
Cradle.
Figure
4.6
2.
After
connecting
the
AC
adaptor
to
the
power
cable,
plug
in
the
plug
of
the
power
cable
to
an
electrical outlet.
Figure
4.7
3.
Set
the
selector
switch
on
the
back
of
the
Ethernet
cradle
to
the
port
that
will
be
used.
Set
the
switch to “LAN” to use the LAN port or to “USB” to use the USB port.
Figure
4.8
20