User`s guide

4.
Connect
a
USB
cable
(DT-380USB)
to
the
USB
client
port
on
the
back
of
the
cradle,
and
then
connect the other end of the cable to the PC. USB host port is used when connecting the cradle
with other USB peripheral devices.
Figure
4.4
5.
Align
the
USB
cradle
mount
holes
on
the
back
of
the
DT-X7
with
the
mount
hooks
on
the
cradle
after aligning the contacts on the bottom of the DT-X7 with the power contacts of the cradle. The
power LED on the front of the cradle will light green if the DT-X7 has been properly mounted.
Figure
4.5
Status
of
Indicator
1
on
DT-X7
Orange
Red
Green
Important
notes:



