User`s guide

3.5
Visual
Studio
2005
Install
each
‘
msi
’
package
as
described
in
Table
3.1.
This
will
install
all
the
necessary
SDK
and
library files on your PC. See Chapter 8. for basic usage instructions for the SDK. Follow the steps in
Chapter 5 “Connecting the DT-X7 to the PC” before checking the steps below to confirm that you
can connect to the DT-X7 from Visual Studio 2005.
1.
Establish
connection
with
the
DT-X7
via
ActiveSync.
2. Open the application project for VB or C# in Visual Studio 2005.
3. Click the button shown in the red box below (see Figure 3.1) to make sure that Visual Studio
2005 has recognized the connection established with the DT-X7 via ActiveSync. If it does not,
start up ActiveSync again to establish connection.
Figure
3.1
4.
Choose
DT-X7
Device
in
the
pull-down
menu
box
in
Figure
3.2.
Figure
3.2
5.
You
will
now
be
able
to
deploy
solutions
and
also
debug
applications
on
the
attached
DT-X7
using the Visual Studio 2005 debugging features.
16