Specifications

Setting Specific Operation Unique to Code128 Symbology

The terminal supports specific operations unique to the Code128 symbology that are initiated

when certain conditions are met at a time of scanning a symbol of the Code128 symbology.

Table. 2.41

Symbology Condition Performance

At time of scanning a symbol of Code128

that includes the FNC2 function character.

Scanned symbol data including the FNC2

function character is temporarily stored in the

scanner until when a next symbol is scanned.

The stored data is automatically added at the

forefront of the subsequent scanned symbol data

to be output. (See note below.)

Code128

At time of scanning a symbol of Code128

symbology that includes the FNC4

function character(s).

The value “128” is added automatically to a data

character in ASCII of scanned symbol located

next to the FNC4 function character. If two

sequentially laid FNC4 function characters in a

symbol are scanned, either other group of two

sequentially laid FNC4 function characters

within the same symbol are read, or “128” is

added automatically to each subsequent ASCII

character data laid next to the two FNC4

function characters until the last.

Notes:

The size of combined symbol data including the FNC2 function character is limited to 98

characters (maximum). If the size of any combined symbol data exceeds the maximum number of

characters, the previous combined symbol data that have been scanned right before the exceeded

combined symbol data are output.