Specifications

29
2.1.7. LED
Basic Specifications
There are two LEDs integrated in the terminal, one for the user notification on the right and the
other for charging the battery complete on the left.
Table. 2.12
LED Color Description
Red User notification (alarm), scanning a bar code
Green Scanning a bar code
Blue Connection established via Bluetooth
Orange Connection established via WLAN
Purple None
Right-side LED
Sky blue None
Red Charging battery pack Left-side LED
Green Charging battery pack complete
Notes:
• The user notification LED can be used to indicate various notifications by the OS and other
notifications defined by the user.
• All colors available in the LEDs are indicated by using the Common Device Control Library.
• The charging battery complete LED cannot be controlled for its ON/OFF state with software.
User Notification (Alarm)
This indication mode is used for alarm notification, etc. The LED can be lit for a specific time
using CeSetUserNotification()API function.
Table. 2.13 Specifications
Operating mode Specification
Blink interval ON for 1 second in red, OFF for 2 seconds
Continuous ON time ON for 30 minutes (OFF when VDET is detected.)
Note:
Indication for scanning a bar code has the priority over other indications.
Scanning
This is used for notification of a scanning result which is controlled by use of the Common Device
Control Library.
Table. 2.14 Specifications
Operating mode Specification Attribute
Scanning complete ON in green for a specified period of time, then OFF. L_SCANOK
Scanning in error ON in red for a specified period of time, then OFF. L_SCANERR