User Manual

E-25

Multiple Battery Charger

AD-S12500A

• You can connect up to three Multiple Battery Chargers.

DT-X400 Charging status LED display

Orange: Charging

Green: Charging complete

Red: Standby due to battery pack error or because the ambient temperature is

outside the charging temperature range.

(Charging begins when the temperature returns to the charging temperature

range.)

Orange ﬂ ashing: Charging (DT-X400 cannot start up because the charge remaining in the

battery pack is too low. Wait until the charging status LED stops ﬂ ashing

and lights orange.)

Dual Battery Charger

AD-S12500A

• You can connect up to three Dual Battery Chargers.

Charging status LED display for the four-bay battery charger

Red: Charging

Green: Charging complete

Red/green alternate ﬂ ashing: Standby because the battery pack is faulty, is installed

incorrectly or is outside the charging temperature range

(Charging begins when temperature returns to the charging

temperature range)

Precautions for Use

• Even if the battery in the DT-X400 is already fully charged, charging will begin when

you set the DT-X400 in the cradle. It may take several minutes for the fully charged

status to be indicated.

• Take care not to trap objects such as the strap in the cradle.

• The power/data communication terminal and the battery pack power contacts

should be cleaned periodically using an implement such as a dry cotton bud.

Soiling or dust buildup could cause connection problems.