Specifications

Operation Specification

Startup

Copy Devices, the package name of which is “jp.casio.vx.util.kitting.clone”, can be started from

the Home Application.

Procedure

Firstly, perform the full backup on the owner terminal by using the basic utility

Backup/Restore (see note 1).

The owner terminal can search the terminals, Wi-Fi Direct of which is enabled, as client terminals.

For the owner terminal to search client terminals, client terminals must be started before the owner

terminal starts searching.

Therefore, follow the following steps to copy terminals:

1. Start this application of both the owner and client terminals.

2. On the client terminal, select “Receiver mode” and push Start button.

3. On the owner terminal, select “Sender mode” and push Start button.

The owner terminal performs the following procedure consecutively.

A. Receive the requests from client terminals

B. Search client terminals

C. Pair with client terminals

D. Copy to client terminals

If Wi-Fi Direct is enabled in some client terminals during the owner terminal performing, these

client terminals will be copied in the next procedure of the owner terminal.

In case the number of client terminal is five, it will work efficiently.

If there are more terminals, Wi-Fi Direct of which is enabled, as client terminal, it will take time

to search client terminals.

Because of this reason, it is recommended the following steps in case of many client terminals.

(1). Select “Receiver mode” and push Start button at the each five client terminals.

(2). Select “Sender mode” and push start button on the owner terminal.

(3). After owner terminals display as “Connecting(n/N)”, start this application and push Start

button on next five child terminals.

After these steps, please perform above (3) step repeatedly.

And in case the procedure for next client terminals does not start even if 1 minutes has passed

after current client terminals display as "Searching parent device"

are copied, it's recommended to restart procedure by following steps.

A. Quit this software in the parent terminal. (Wi-Fi Direct is disabled automatically.)

B. Start this software in the parent terminal, and enable the "Wi-Fi Direct" and push "Start".