Specifications

149
Basic Functions
1) Cloning of the owner terminal data
The built-in storage of client terminal is copied by receiving the data (including backup data) in
built-in storage of owner terminal.
After the data in built-in storage is copied, the data except in built-in storage is also copied if
restore is executed on client terminal.
The following folders in built-in storage are not applicable.
• LOST.DIR (wreck of files broken by system inconsistent)
• The folder that is not permitted to write (example: android_secure)
2) Efficient and continuous cloning
This software performs cloning using high-speed Wi-Fi Direct communication.
Because the owner terminal performs the following steps continuously, it can treat even client
terminals added after one copy session as cloning targets.
<Owner terminal>
1. Zip the data to transfer.
2. Search for target Wi-Fi Direct devices.
3. In case target Wi-Fi Direct devices are existed, connect with first target Wi-Fi Direct
device.
4. After connecting is completed, receive the pairing notification from client device.
5. Notify the client terminal of the completion of preparation of data transferring.
6. Wait the completion of data reception by the client terminal.
<Client terminal>
1. Search for target Wi-Fi Direct devices.
2. If the Wi-Fi Direct owner terminal exists, check/execute paring.
3. Notify the owner terminal of confirming pairing.
4. After receiving the completion of preparation the data to transfer by owner terminal, start
data reception.
5. After completing of data reception, notify the owner terminal of the completion of data
reception.
Connecting procedures 3 - 5 of owner terminal are sequential behavior to connect with each
client terminal.
After connecting between owner and client terminal, receiving procedure 4 of client terminal is
executed by multiple client terminals in parallel.
3) Time adjustment
After completing of data reception, client terminal time is adjusted by owner terminal time
when to display the restore confirmation dialog.
4) Localization
If Japanese is selected as the language, various kinds of data are displayed in Japanese. If
another language is selected, various kinds of data are displayed in English.