Specifications

127
Figure 5.12 Security settings screen
Table 5.7
No. Item Description
1 Administrator
authentication
Specify whether to enable or disable administrator authentication.
Note that, even if administrator authentication is enabled, no administrator
authentication screen is displayed for users who are granted system settings
permission.
2 Local data erasing for
secutiry
Specify whether to enable or disable the function that returns the terminal to
the factory defaults when authentication has failed in succession the specified
number of times.
3 Number of login failure Specify the number of authentication failures allowed, using a one-byte
number in the range from 0 to 99. If 0 is specified, the local data erasure is
disabled.
4 Enter the password. Enter the password for authentication.
The password must consist of 1 to 32 one-byte alphanumeric characters.
The password will not be changed if this field is left blank.
5 Confirm the password. Enter the password for authentication again for confirmation.
6 Cancel Terminates the security setting tool.
A confirmation dialog appears if your edits have not been saved.
7 OK Use this item to accept your edits.
1
2
4
5
7
3
6