Hardware manual

52
4.3.5 HA-G35CHG
Table 4.21 explains about mechanical performances on the Car Mounted-type Battery Chargers
(HA-G35CHG, HA-G35CHG-CN).
Table 4.21
Item Specification Remark / Condition
- 5 to 200 Hz
- In X, Y, and Z directions
- Reciprocally for 2 hours
Resistance to vibration 3.0 G or less
- 5 to 200 Hz
- Reciprocally for 4 hours
Resistance to vibration
(in carton box)
3.0 G or less
- 10 to 55 Hz
- In X, Y, and Z directions
- Reciprocally for 30 minutes
Resistance to impact
In bare condition 70 cm
- 1 cycle on each of 6 faces and four
edges onto concrete
In individual carton 70 cm or less
In master carton 50 cm or less
- 1 cycle on each of 6 faces, 1 corner
and 3 edges
4.3.6 HA-G32DCHG
Table 4.22 explains about mechanical performances on the Dual Battery Chargers (HA-G32DCHG,
HA-G32DCHG-CN).
Table 4.22
Item Specification Remark / Condition
Resistance to vibration 1.5 G or less
- 10 to 55 Hz
- In X, Y, and Z directions
- Reciprocally for 30 minutes
- While the power is turned off.
Resistance to vibration
(in carton box)
1.5 G or less
- 10 to 55 Hz
- In X, Y, and Z directions
- Reciprocally for 30 minutes
Resistance to impact
In bare condition 70 cm
- 1 cycle on each of 6 faces and 4
edges onto concrete floor
In individual carton 70 cm or less
In master carton 60 cm or less
- 1 cycle on each of 6 faces, 1 corner
and 3 edges