User`s guide

E-18
4 Screen Displays text and operating instructions. In addition, operations
can be performed and data can be input using the stylus
provided.
5 Microphone Used for audio input (including voice).
6 Power Key Turns the power on and off.
7 CLR Key Used to clear one letter to the left of the cursor.
8 Center Trigger Key Used to perform bar code reading. Can be assigned an arbitrary
function.
9 Enter Key Press when fi nishing entering numerical values or when moving
to the next step.
10 Cursor Keys Perform the same functions as the up and down arrow keys on a
PC keyboard.
11 Numeric Keys Used to enter numeric values and decimal points.
12 Fn Key Used to make various settings in combination with the function
keys or numeric keys or when starting a pre-registered
application.
Fn+3: Selects text entry mode by toggling the modes in sequential
order below.
Numeric

Uppercase letter

Lowercase letter
13 Function Keys Application software can assign a desired function to each one
of the keys, F1 to F12.
14 Hand Belt Holes Used to attach the hand belt.
15 L Trigger Key Used to perform bar code reading.
16 R Trigger Key Used to perform bar code reading.
17 IR Port Used for communication with another Handheld Terminal.
18
Barcode Reader Port Laser light or LED light is emitted from this window that reads
bar codes.
19 Stylus Holder Holds the stylus.
20 Reset Switch Used to reset the Handheld Terminal.
21 Camera Lens
(Camera models)
Takes photos.
22 Flash LED
(Camera models)
Used for taking photos.
23 Expansion Port Provided for future expansion.
24 Battery Pack Cover
Lock Switch
Used to lock the battery cover and to release.