Specifications

307
Table 4.15 Buttons in the right Toolbar
Button Description
Trapezoidal Correction Changes the trapezoidal correction to “Correct” or “Don’t correct”.
Size Chooses a capture size from “UXGA”, “QUADVG”, “XGA”,
“SVGA”, “VGA” and “1/4VGA”.
Image quality Chooses an image quality from “Bitmap”, “Fine”, “Normal” and
“Economy”.
Magnification Chooses a magnification from “1.0” and “1.5”.
Focus function Chooses either “Auto”, “Close-up” or “Mid-range”
Focus operation Pressing the Focus operation button when the Focus function is set
to Auto focuses objects appearing in the center of the screen. After
the camera is focused, correct the frame and press the shutter button
to capture the image. This button cannot be used in Focus function
modes other than Auto.
Shutter button Press the shutter button to capture the image. If the Focus operation
button is not pressed while the Focus function is set to Auto, it is
performed after the image is captured.