Specifications

26
User Disk Clear
This operation is carried out if Fn and CLR and “.” keys are held down at the same time and then
the reset switch is pressed for a period of one second or longer while the terminal is in operation.
A message (see Figure 2.7) to confirm memory initialization ap
pears. The R Trigger key is used to
confirm the User Disk Clear.
Figure 2.7
After the R Trigger key is pressed twice, User disk is formatted and RAM are initialized to the
factory condition (see note).
Figure 2.8
Notes:
Distributor ID is not cleared.
The utility to carry out the User Disk Clear is available. See “DSKClean” for detail.