Specifications

25
2.1.8 Reset
The role of the boot loader in Windows Mobile (OAL) (see Figure 2.6) is to boot the OS after
initializing the hardware. On the terminal, it is possible to carry out the inspection tool and OS
update tool with special key operation as described in the respective figures below.
Figure 2.6 Windows Mobile
To reset the terminal, there are several ways to carry out. The explanation below describes the
methods to reset the terminal.
Soft Reset
The operation requires pressing the reset switch on the back of the terminal. It initializes the
program memory.
OS Clear and Reload
This operation is carried out if Fn and CLR keys are held down at the same time and then the reset
switch is pressed down. It initializes the RAM and reloads the OS again from the OS disk.
Hard Reset
This operation is carried out if Fn, Center Trigger and ENT keys are held down at the same time
and then the reset switch is pressed down. The RAM and Clock (RTC) are initialized and then the
system restarts.
SD Loader
BootSelector
(Fn+5+Reset)
IPL
OS Loader
(Soft reset (Default))
OS Clear and Reload
(Fn+CLR+RESET)
User Disk Clear
Hard Reset
ULD
R
(Fn+CLR+PWR+Reset)
(Fn+CLR+”.”+Reset)
(Fn+Center Trigger+ENT+Reset)