Specifications

227
Communication Tab
This tab is used to set up the Faster Connection and AFH (“Adaptive Frequency Hopping”)
features.
Figure 3.115
Detail Settings
If any one of Avoid Wireless LAN Channel and Choose Bluetooth frequency manually
radio buttons is set enabled in the Communication tab, the following detail settings can be
possible using the screen below.
Figure 3.116
Wireless LAN Channel to avoid on Bluetooth Device
These pull-down menus are used to set a WLAN channel which does not allow a Bluetooth device
to use the same channel. Maximum 3 channels can be set for WLAN channels that a Bluetooth
device cannot use.