Specifications

191
Notification Tab
This tab is to set up notification method selecting one of the methods listed below. The
notification is issued when scanning a bar code is complete.
- Lights up the LED.
- Sounds the buzzer.
Figure 3.62
Scanning Key Tab
This tab is to set up “Enable” or “Disable” for each key of the keys listed below as the scan trigger
key.
- Left Trigger (L Trigger key)
- Right Trigger (R Trigger key)
- [L] Key (Cursor Left key)
- [R] Key (Cursor Right key)
- [U] Key (Cursor Up key)
- [D] Key (Cursor Down key)
- Center Trigger (Center Trigger key)
Figure 3.63
Note:
Since the trigger grip cannot be integrated to the terminal, setting of the scan trigger key with the
trigger grip does not make any effect to initiate scanning operation.