Specifications

18
1 Performs as 7 key.
A Performs as “P”, ”Q”, ”R” and ”S” keys.
Character input
mode
a Performs as “p”, ”q”, ”r” and ”s” keys.
7
Function mode F Start the application.
1 Performs as 8 key.
A Performs as “T”, ”U” and ”V” keys.
Character input
mode
a Performs as “t”, ”u” and ”v” keys.
8
Function mode F Start the application.
1 Performs as 9 key.
A Performs as “W”, ”X”, ”Y” and ”Z” keys.
Character input
mode
A Performs as “w”, ”x”, ”y” and ”z” keys.
9
Function mode F Start the application.
1 Performs as “.” key.
A Performs as “@.,”’`:;~|” keys.
Character input
mode
a Performs as “@.,”’`:;~|” keys.
.
(Decimal
point)
Function mode F Performs as “-” key.
Key Input Mode Switchover
The A (Fn+F8) key on the keyboard can be used to change the key input mode.
Indication of Key Input Mode
Key input mode currently specified appears in the title bar. The modes that can be displayed are
“1” as numeral, “A” as alphabets in uppercase letter, and “a” as alphabets in lowercase letter.
Figure 2.2
Turnover Key Auto Confirmation
After pressing a turnover key, if the preset time period has been elapsed from the time when the
turnover key is released, the turnover character input will be automatically made. The Control
Panel can be used to set up “Enable” or “Disable” for the auto confirmation on the turnover
character input and to set up the time period until when its confirmation is made.
Key Repeat
Continuously pressing of any of the “0” to “9”, “ ↑“, “←”, “→” and “ ↓“ keys repeats the key
input.
Key Click Sound
The key click sound is generated when a key is pressed. However, it is not generated when the key
is released or in mid-course of repeating the key input. The Control Panel can be used to set up the
sound to mute, low or loud.