Specifications

96
TCIP section
This is for setting the integrated WLAN module’s IP address.
Table 3.64
Key Setting Value
DHCP Specify “Enable/Disable” on the DHCP.
1: Enable DHCP.
0: Disable DHCP.
The following settings are disabled if “Enable” is specified.
IPADDRESS Specify IP address.
SUBNETMASK Specify subnet mask.
DEFAULTGATEWAY Specify default gateway.
DNS1 Specify primary DNS server address.
DNS2 Specify secondary DNS server address.
WINS1 Specify primary WINS server address.
WINS2 Specify secondary WINS server address.
The following are the default values and operations outside of the range.
Table 3.65
Key Default Value Operation Outside of Range
DHCP “1”: DHCP enabled “1”: DHCP enabled
IPADDRESS Not set. Set as it is.
SUBNETMASK Not set. Set as it is.
DEFAULTGATEWAY Not set. Set as it is.
DNS1 Not set. Set as it is.
DNS2 Not set. Set as it is.
WINS1 Not set. Set as it is.
WINS2 Not set. Set as it is.
Note:
IP address is set as it is without validity check carried out on it.