Specifications

95
The following are the default values and operations outside of the range.
Table 3.61
Key Default Value Operation Outside of Range
WLANPOWER Not set Not set
POWERSAVE Not set Sets just as it is
Operation relies on the WLAN driver.
WLANCFG “1”: Enable “1”: Enable
RoamingRSSILevel Not set -
RoamingAvailableTime Not set -
RoamingRSSISpan Not set -
BandConfig Not set Sets just as it is
Operation relies on the WLAN driver.
STATIC section
This is for specifying an Access-Point that the integrated WLAN module establishes the
connection with.
Table 3.62
Key Setting Value
SSID Specify SSID.
ADHOC Specify Infrastructure mode or AdHoc mode.
1: Infrastructure
0: AdHoc
WEP Specify “With/Without” of WEP.
1: Without WEP
0: With WEP
KEYINDEX Specify WEP key INDEX in the range of 0 to 3.
KEYDATA Specify encrypted WEP key data.
- 20bytes for 40-bit WEP
- 52bytes for 108-bit WEP
- Create using the Net Search utility.
The following is the default values and operations outside of the range.
Table 3.63
Key Default Value Operation Outside of Range
SSID Ignore all of the STATIC section. Ignore all of the STATIC section.
ADHOC “1”: Infrastructure mode “1”: Infrastructure mode
WEP “1”: Without WEP “1”: Without WEP
KEYINDEX Ignore all of the STATIC section. Ignore all of the STATIC section.
KEYDATA Ignore all of the STATIC section. Ignore all of the STATIC section.