Specifications

93
3.7.5 Channels
The factory set default the no. of channels is set to “1CH-13CH” (13 channels).
3.7.6 WLAN Setting with Configuration File
The configuration file can be used to set the default values for the WLAN settings. By loading the
configuration file into the terminal, settings required for WLAN operation can be easy.
• The path of the configuration file is “\FlashDisk\System Settings\WLANCFG.ini”.
• If no configuration file is available, WLAN operation is initiated with the default settings.
• When the IEEE802.1x standard is set enabled, the default values cannot be changed using the
configuration file.
Timing to Load the File
The timing for incorporating the configuration file is when a reset or a full reset is performed on
the terminal. When loading the configuration, if the file itself does not exist, its format is wrong,
or the file has been specified as “Disable configuration file”, the default settings will not be made
using the configuration file.
Creation Method
The net search utility can be used to set and change the default settings. Editor available generally
also can be used to set the default settings. Note, however, that the WEP key has to be described
as being in encryption status, so use the net search utility to create an encrypted character string in
advance and copy it. The WLAN settings made using Microsoft’s “WLAN setting” will not be
reflected in the configuration file.