Specifications

79
3.3.6 Streaming Display Function
This function sequentially displays an image while continuously operating the CMOS Imager.
With the image capturing function in Chapter 3.3.4 “Image Capture Function”, the streaming
display function can be used to display image preview.
Table 3.51
Reduction 1/1, 1/2, 1/4
1/1 reduction
1/2 reduction
1/4 reduction
188 x 120 pixels
Size
Partial extraction is possible.
Scale 2- or 256-gray scale
Frame rate 30 fps or less
3.3.7 LED Intensity
The terminal integrates the illumination LED for lighting and the aimer LED for focusing a
symbol to scan. Setting the intensity of the illumination LED to zero will turn off. This setting is
useful when the terminal is used outdoor where the illumination LED is not needed, or when a
stamp in red is to be read.
Table 3.51
Type LED in red
ON, OFF Possible
Illumination
Intensity adjustment
Not possible for fine tuning. Set to either “0” for turning off the
LED or “100” for turning on.
Type LED in green
ON, OFF Possible
Aimer
Intensity adjustment
Not possible for fine tuning. Set to either “0” for turning off the
LED or “100” for turning on.