Specifications

60
No. of Scanning Times
In “Continuous Scanning” mode, scanning continues for the preset number of scanning times and
then it will stop in waiting mode. The number of times for scanning can be set in the range of 1 to
9 either at the Control Panel or using the Common Device Control Library. The default is 1.
Scanning Period
Valid time period of scanning after the trigger key is pressed down can be set in the range of 1 to
9 either at the Control Panel or using the Common Device Control Library. After the preset time
has elapsed, the scanner will go into standby mode waiting for the trigger key to be pressed down
again. The default is 3 seconds.
Double Scanning Prevention
This is used to prevent double scanning of the same bar code during the “Continuous Scanning”
mode is being set. Scanning the same bar code again will be prohibited as long as the scanning
continues for the preset number of times. However, it can be scanned when a new “Continuous
Scanning” starts.